Skip to product information
1 of 3

Panther CCTV

POE Powered 2 Port Switch & Network Cat5 Cat6 Midspan Cable Range Extender Passthrough Repeater for IP Cameras

POE Powered 2 Port Switch & Network Cat5 Cat6 Midspan Cable Range Extender Passthrough Repeater for IP Cameras

  • Can Serve 2 Purposes (or both at the same time): #1) Can be used as a POE powered 2 Port POE switch #2) Can be used to extend your network cable run past the normal 300 meter distance limitation
  • POE powered 2 Port switch: Has 1 port in and 2 ports out. Takes incoming POE through the in port and will act as a 2 port unmanaged POE switch through the 2 out ports to 2 more networkable devices.
  • POE and/or Network Range Extender: Allows you to run cable lengths past the tradition 300 feet restriction. Daisy chain up to 2 extenders to run upwards to 900 feet
  • Requires no local power, you dont need a power source nearby the extender as its simply powered from the incoming POE power from your POE switch or injector at the beginning of the cable run. (POE injector/switch is not included)
  • Wall mountable low profile design. only 3.1" x 3" x 1"

Product Description

POE Extender

No longer do you have to worry about 300FT cable run limitations. This midspan extender will take an incoming POE signal and transfer it to even further distances. Allows you to run cable an additional 300FT. Daisy chain up to 2 extenders to run cables up to 900FT.

POE Powered 2 Port Unmanaged Switch

Take an incoming POE power source to be powered and act as a standard 2 Port POE switch. Includes 1 port in and 2 ports out. Useful if you want to take an incoming POE signal sent through one cable and be split out to power 2 cameras at once. You can also use it as a switch for non-POE devices.

No Local Power Required

This device requires no local power and does not need a receptable nearby. The only way it is powered is by the incoming POE power from your POE switch or Injector. (POE switch or Injector not included)

Low Profile Design

Wall mountable, low profile design. Only 3.1" x 3" x 1"

Use as a POE Extender

  • Extender your POE and Network Feed up to an additional 300'
  • POE Extender Runs off Incoming POE feed. No Local power is needed

Use as a POE Powered 2 Port POE Switch

  • Takes one incoming POE Feed and splits it into 2
  • Essentially works as a POE powered unmanaged 2 port switch
View full details